One of the most common requests we receive is quite simple:
“I need a welding table with a full set of accessories.”
It sounds straightforward, but there’s usually one thing we need to ask before preparing the quotation: What are you going to weld?
Some customers are building steel frames. Others work with pipes, brackets or small metal parts. And some are setting up a new workshop and aren’t quite sure what they’ll need yet.
That’s perfectly normal.
The thing is, a full set of welding table accessories can mean very different things depending on the work you’re doing.
More Accessories Doesn’t Always Mean a Better Setup
When customers first look through an accessory catalogue, it’s easy to assume they’ll need a little bit of everything.
Different clamps, stops, angle brackets, positioning pins, squares… the list can get quite long.
But once you start using the table, you’ll probably find yourself reaching for the same few tools most of the time.
For example, if you’re mainly welding rectangular frames from square tubing, a few good clamps, positioning stops and 90-degree brackets will cover a lot of your everyday work.
You might not need some of the more specialized fixtures at all.
On the other hand, if you’re working with round pipes or irregularly shaped parts, those basic accessories may not be enough.
That’s why we don’t think the biggest accessory package is necessarily the best one.
Start With the Clamps
If we had to choose where to start, it would be the clamps.
They’re the accessories you’ll probably use most often.
Some clamps hold the material down against the tabletop. Others push it sideways against a stop or positioning block.
Both are useful, but they don’t do exactly the same job.
And here’s something that’s easy to overlook: not every clamp works well with every workpiece.
A clamp that’s fine for a large square tube may be awkward when you’re trying to hold a small flat bar.
Before ordering, it’s worth checking the size of the material you usually work with and where the clamp needs to apply pressure.
A few suitable clamps are much better than a box full of ones you rarely use.
Stops and Angle Brackets Make Everyday Work Easier
Positioning stops might not look particularly interesting, but they’re useful when you’re making the same parts again and again.
Imagine you’re welding ten identical steel frames.
Without fixed reference points, you may spend quite a bit of time measuring and adjusting each frame before welding.
With stops positioned on the table, you can use the same setup repeatedly.
Angle brackets are useful for a similar reason.
They help hold parts upright or position two pieces at 90 degrees. If you regularly make frames, supports or brackets, you’ll probably use them quite often.
You don’t need every size available, though.
It makes more sense to choose a few based on the dimensions of your workpieces.
And don’t forget the locating pins. They’re small, but you’ll need the correct ones to secure many of these accessories to the table.
What About D16 and D28 Accessories?
This is another question we often get.
D16 and D28 are different welding table systems, and many of their accessories are not interchangeable.
Generally speaking, D16 is a practical choice for smaller and lighter workpieces, while D28 is commonly used for larger or heavier fabrication.
But it’s not simply a matter of choosing D28 because the table is bigger.
A customer working with small, detailed components may prefer D16 even on a relatively large table.
The important thing is to think about the parts you’re making, not just the table dimensions.
If you already own welding table accessories, it’s also worth checking compatibility before buying a new table.
So, Should You Buy a Complete Set?
If you’re setting up your first welding table, buying an accessory set can make things easier.
You get the basic tools together and don’t have to order every small item separately.
But we’d still suggest looking through the list before placing the order.
Do you really need six of that particular clamp? Would two larger angle brackets be more useful than several small ones? Are you working with square tubes, or do you need something to hold round pipes?
These are small questions, but they can make quite a difference to the final cost.
We’ve had customers ask for a complete set, then realize that a smaller selection would actually suit their work better.
And that’s fine.
You can always add more accessories later.
A Few Photos Can Help More Than a Long Accessory List
When we’re not sure what to recommend, we often ask customers to send us a few photos of the products they’re making.
Nothing complicated. Even a picture of a finished frame or a simple drawing with dimensions can help.
It’s usually much easier to suggest suitable clamps and fixtures when we can see the actual workpieces.
At Bocheng Co-creation, we supply welding tables and accessories, but we don’t expect every customer to know exactly which fixtures they need.
If you’re planning to buy a 3D welding table and aren’t sure where to start with the accessories, just tell us what you’re working on.
We can go through the options together and put together something that makes sense for your workshop.
There’s no need to buy tools you won’t use.
Post time: Oct-15-2026